![]() ![]() On six-string guitars and bass guitars, markers are typically single smallish dots on the fingerboard and on its side that indicate the 3rd, 5th, 7th and 9th frets-and the octaves of those positions higher up the neck. The fret arches are sufficiently high that the exterior strings can be fretted without making the finger making contact with the interior strings.įrets may be marked by inlays to make navigating the fingerboard easier. Such a construction is seen on the sitar, where arched frets attach at the edges of a smooth fingerboard unfrettable strings run inside the frets, while frettable ones run outside. Fingerboards may also be, though uncommon, a hybrid of these two. Unfretted fingerboards allow a musician more control over subtle changes in pitch than fretted boards, but are generally considered harder to master. Fingerboards may also be unfretted, as they usually are on bowed instruments, where damping by the finger is of little consequence because of the sustained stimulation of the strings by the bow. Frets may be fixed, as on a guitar or mandolin, or movable, as on a lute. As well, frets do not dampen string vibrations as much as fingers alone on an unfretted fingerboard. Frets let the player stop the string consistently in the same place, which enables the musician to play notes with the correct intonation. On modern guitars, frets are typically made of metal. Frets Six strings bass guitar fingerboardĪ fingerboard may be fretted, having raised strips of hard material perpendicular to the strings, which the player presses the strings against to stop the strings. This reduces the prominence of upper harmonics, giving a more ethereal tone. am Griffbrett) for bowed string instruments to play with the bow above the fingerboard. In particular, the direction sul tasto (Ital., also sulla tastiera, Fr. The word "fingerboard" in other languages sometimes occurs in musical directions. On some instruments, notes can be sounded by the fretting hand alone, such as with hammer ons, an electric guitar technique. Depending on the instrument and the style of music, the musician may pluck, strum or bow one or more strings with the hand that is not fretting the notes. To play the instrument, a musician presses strings down to the fingerboard to change the vibrating length, changing the pitch. The strings run over the fingerboard, between the nut and bridge. It is a thin, long strip of material, usually wood, that is laminated to the front of the neck of an instrument. The fingerboard (also known as a fretboard on fretted instruments) is an important component of most stringed instruments. Fretted classical guitar fingerboard Fretless violin fingerboard For other uses, see Fingerboard (disambiguation). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |